Motorsport Studio - The Art of Racing

Original motorsport and racing art prints

www.motorsport-studio.com

Wednesday, February 23, 2011

TLR Swingarm on TLS

Since the TLR and TLS shock and damper mounts are in very different locations, the TLR swingarm must have new mounts fabricated and welded to the swingarm to be used on a TLS.  The stock TLR mounts were milled off previously, we begin from there:

After some time cranking the handles on the mill, here is one of the new mounts from 6061-T6.









Here is the alignment fixture on the TLS swingarm to accurately locate the new mounts on the TLR swingarm.









Here are the mounts tacked in place.











And welded.  On to assembling the chassis...

Sunday, February 13, 2011

TLR Throttle Bodies for TLS - WHY????

Why indeed, when there is no difference in diameter?  And when the dual injectors of the TLR can be compensated for with injector size of the single injectors of the TLS?  Well, there is no good answer except that I wanted to use TLR gauges on the S, and if you're using the guages, why not the wiring harness, and there you go, jumped off the ramp at the end of the slippery slope.

So, since the orientation of everything is different between the TLS and TLR throttle bodies, orienting them and then coupling them together becomes a real task. 

In the picture are the aluminum adpators to space up the TLR throttle bodies to the TLS airbox.  Next the bridge between the throttle bodies.  There is another one that will go between the injectors to help stiffen the throttle body assembly from twisting. 






And here, some of the scrap required to make the bridge, along with the welding fixture.  All this, for such a simple little thing!

Saturday, January 22, 2011

Lincoln Square Wave TIG 175 PRO

Lincoln TIG for sale, upgraded with a new to me machine : )

Saturday, January 1, 2011

Goodbye CR500 powered NSR250

Well, it was time to face reality and take down the CR500 powered NSR250.  It was a 1991 MC21 Honda NSR250 modified by the previous owner to take the 1990 CR500 engine, needing only some minor refreshing in order to be race worthy again.  With my fresh race license I thought I would use this as a first racebike because a 'normal' (read: 'sane') bike wouldn't be interesting.  Yeah, not so much.  Here it is as bought from the previous owner near Kokomo, IN:


The engine was mounted using solid stock that was welded to the inside frame rails and the stock front mount downtubes were also modified the same way.  The rear crossbeam was modified for the rear upper mount, the front crossbeam was through bolted for the cylinder head stay and there was a small lower cradle to hold the lower engine mount.  All solid mount, the fabrication was workmanlike, not the prettiest but it worked more or less.  The OEM pipe was cut apart, reclocked and rewelded to get the pipe under the engine.


 The only things I did when I bought it were to replace the tires with Michelin H2 DOT's on the stock rims, size 110 front and 150 rear, and the normal fluid, plug, chain, etc on the motor.  First time at the track was at Putnam Park for a trackday, what I remember:

- If not for the vibration, it was an awesome package.  Very torquey, could be short shifted and preferred to be in the meaty part of the powerband.  Since power dropped off quick and hard up top with little over-rev, it really wanted to be run around the torque peak and not buzzing at high rpm.  In a lot of ways it felt alot in character like a TL1000 big twin, a nice torquey motor.

- The chassis felt great, never touched a clicker although the gearing was off and the shifter was very clunky and difficult to engage cleanly, so I mostly kept it in 4th gear and relied on the engine torque.  Compared to the TL it was like riding a bicycle, turned in very nicely, with the stock rearsets it ground the pegs easily and liked being on it's side.

- VIBRATION!!!  I had read and heard how bad the vibration might be, but it was beyond what I could tolerate.  My fingers and hands would be numb from vibration just a few laps in.  It was a stock engine so  the balance factor could have been adjusted to move the vibration to a different region (lower in the rpm range like the Tulda CR500 powered bike), but I never got far enough along to play with this.

- Pain in the A$$ to hot start!  Bike had a modified kickstart lever which reached through the bodywork, but it was oriented strange and the bike was a pain to start once it was hot.  I fouled the plug a couple times that day due to hot start issues, and when it was running my legs were so tired from kick starting that I was worn out before I got a few laps in.  Push starting required lots of speed, running and jumping on would just slide the rear tire, this big single had alot of compression.  This would never have worked as a racebike because I would either miss grid due to not starting, or I would overheat sitting in grid, and if it stalled, it would take a crew of fast running pushers to get me started again.

It wasn't a complete disaster even with those issues, so after this first outing I set about to correct some of the things that needed immediate attention:

-  Hot start issue - Bought powered starting rollers, basically a truck starter chain driving two rollers.  Starting was a little easier with the rollers, but they were small diameter so the bike easily rolled off the rollers.  I meant to make a new roller starter with the larger rollers at an angle, but never got around to it.

- Narrow powerband - I contacted a few places to look at a new pipe design which would extend the powerband, but quickly found that the main body diameter of the pipe would need to be on the order of 6" outer diameter, and there was no way I could package this under the bike, it would have scraped the ground with the slightest suspension travel.

-  Shifting and peg scraping - the linkage was quite a bit off axis between the lever and the shaft, so I ordered Tyga rearsets and made a new linkage for the shifter rod.

After all this I never got around to running it again, and lost interest, primarily because of the fabrication of the engine install itself.  Since all the frame work and engine mounts needed to be redone, it seemed the best course of action would be to take it down to the bare frame, and take it all back out when time allows for a proper rework.

So, here is the bike before it was stripped, and after.  I have a clean fresh MC21 frame and swingarm that will be used as the basis for the next version of this bike, it won't be a CR500 engine but it won't be a stock 250cc NSR or RS motor either.  Something interesting this way comes.  Eventually...


 

Monday, December 20, 2010

MotoGP like NASCAR? Yes please!

In the January issue of Roadracing World magazine the 'motogp mutterings' column by Mat Oxley talks about the inagural season of the Moto2 class and the way in which the series 'marks a fundamental shift of philosophy in a sport that had operated with the same mindset since 1949', due to the institution of spec engines and spec tires which allow a grid (and podiums) populated by a wide variety of teams and riders, the opposite of the previous domination of the class by the only 2 factories that put engineering development into the bygone 250cc 2 stroke GP motor.

In the article, he mentions the amusing comment of a noted 2 stroke tuner describing the 2 stroke GP bike as a racehorse and the Moto2 bike as a donkey, and further alludes to the displeasure of racing 'purists' who "suspect the new class to be at the thin end of the wedge - the transformation of a once elitist sport into a form of low-brow entertainment, a motorsport Gladiators, a two-wheeled NASCAR."

This is not the first time that NASCAR has been used as a negative example of what a high level racing series can turn into, but with all due respect to Mr. Oxley, this kind of negative association could not be more misguided, at least as it relates to motorcycle racing. We should be so lucky as to have high level motorcycle racing classes like MotoGP that mimic the rules set of NASCAR. In fact, a NASCAR-like rules set is something that the top MotoGP riders have been publicly wishing, in vain, that the sport could return to. How is that, you say? Well, here is what NASCAR has that every MotoGP rider, fan, journalist, EVERYONE, except for the factories, wishes the class had:

1) Cable operated mechanical throttle
2) Larger displacement than anything that is available to the public in the same platform

With just these 2 things, cable throttle and large engine displacement, the list of 'non criticals' becomes much less relevant, and it is no accident that these are things that racers, fans and journalists are NOT excited by, which I suspect no one would miss if their impact was greatly reduced:

First, electronics - without engine control module (ECM) access to the throttle plates and with large engine displacement, the level of control authority given over to electronics becomes much less, because the 'air' part of the air/fuel ratio cannot be regulated by the ECM, it can only be regulated by the riders' right wrist. With only fuel and spark timing able to be controlled, and with the very fat torque curve of a large displacement engine, development of both the engine and chassis will need to focus primarily on the relationship between mechanical grip and rider feel, without the bandaids afforded by allowing the computer to determine the optimum throttle angle (engine output) for the given situation, which might now depend on which corner of the track they're on, the lean angle, lateral/longitudinal accleration, gear selected, amount of relative front/rear wheelspeed, suspension travel(s), and fuel level. Oh, and almost forgot, throttle position.

Now of course we know that even getting rid of onboard sensors like wheel speed sensors and gyros, and with a cable throttle, a fuel injected bike can utilize a rate of change based control strategy to control wheelspin, but this level of ECM intrusion into rider controlled inputs is infinitely less intrusive than what is allowed now, where torque output is referenced to specific corner and lean angle. Further, while wheelspin is reduced, relative yaw (or slip angle), is still primarily rider controlled, and wheelie control is 100% rider.

Second, fuel capacity - when every bike on the grid can easily have too much power at every rpm, and with limited means of torque truncation due to the lack of electronic throttles, power output does not need to be artificially governed by restricting fuel capacity. Instead, power output, and the shape of that curve, would be functionally governed by rideabilty, traction and tire life. As on the Aprilia Cube MotoGP 990cc effort it may be possible to build a monster motor with huge output, but harnessing that power, making it rideable often means reducing the output, not because of the rules, but because the bike works better with less.

All of the top level riders, Rossi, Stoner, Hayden et al, have lamented the move to the small 800cc displacement and the increasing level of control authority given over to electronics. And for sure the most exciting racing from the 800cc era, with maybe a few laps where lead positions change, is nothing compared to the exciting racing from the 990cc era, where there were often mulitple lead changes in one lap, with those same leaders relegated to lower positions as tires wore. Today's MotoGP machines that depend so much on corner speed allow fewer chances for overtaking, deviation from the inch perfect line and giving up midcorner speed cannot be made up for with corner exit drive. As a result,we receive our reward in the racing, or lack thereof, that we see.

Ask any MotoGP rider whether they would prefer NASCAR like rules as propogated by the big OEM auto manufacturers with cable throttles and big engines, or the current motorcycle manufacturers (MSMA)/Dorna rules package, even with the rules limited return of the 1000's, and see if they regard NASCAR as a negative example of rules making. Colin Edwards certainly would have some expletives handy to explain what bikes like that would be like to ride. My bet is that Rossi on a Barilla sponsored 1200cc, carb and cable throttle powered 'Ducati', with Stoner and Lorenzo on essentially the same bikes except for their sponsors, would make for some exciting racing.  Maybe I am a dumbed down NASCAR loving American but I make no excuses for my appreciation of seriously wide, gooey, and long black lines out of every corner...

The Aprilia Cube, when way too much is...way too much.