TLR Swingarm on TLS

Since the TLR and TLS shock and damper mounts are in very different locations, the TLR swingarm must have new mounts fabricated and welded to the swingarm to be used on a TLS.  The stock TLR mounts were milled off previously, we begin from there:

After some time cranking the handles on the mill, here is one of the new mounts from 6061-T6.

Here is the alignment fixture on the TLS swingarm to accurately locate the new mounts on the TLR swingarm.

Here are the mounts tacked in place.

And welded.  On to assembling the chassis...